[Smitty]

Its linked in the Tippmann Super stickey...you know the one that says read before you post. Sorry Im just being a jerk. But yeah man its already sticked in the super stickey. Welcome to the forum.

[daniel6990]

Sry I couldn't tell. It's just that most sticky's I see are near the top of the forum. This one was like in the middle.

[007]

I have pro custom and i can't the skews out any advice

[Torch]

What's the problem? Rust? Stripped the heads?

[007]

Originally Posted by Torch

What's the problem? Rust? Stripped the heads?

I don't think it's rust or stripped heads it's brand new i don't know what the problem is

[Torch]

Proper size hex wrench should get them moving pretty easy. They might just be tight from the factory. I doubt they're loctited in, which would make them tougher. If they are you might see some red of blue 'dried up gel' looking stuff around the threads.

Blue loctite will break with force, red usually needs some heat before it'll let go.

[dakota]

hey ive got a 98c and my guns shooting crazy. I pull the trigger once and it keeps firing even after i let go. I have to grab the bolt for it to stop. Ive had it for nearly a year and nvr had prblms with it. And no it wasnt out of co2. I filled it and tried it again. I always keep my gun maintained but its really acting up.

[Pishi]

Hey guys, can I use a 3000 psi compressed air tank on my Tippmann 98 custom?

[Smitty]

As long as it has around 800 psi output, yes.

[FallenPro]

Originally Posted by dakota

hey ive got a 98c and my guns shooting crazy. I pull the trigger once and it keeps firing even after i let go. I have to grab the bolt for it to stop. Ive had it for nearly a year and nvr had prblms with it. And no it wasnt out of co2. I filled it and tried it again. I always keep my gun maintained but its really acting up.

im having the same problem

[Smitty]

sounds like your sear or bolt might be worn out. Yes people I am still alive.

[CaptainBanzai]

Originally Posted by Smitty

As long as it has around 800 psi output, yes.

How do you check that exactly?

[thebeachbum83]

I have an older model 98c (about 5 years old), not exactly sure what the serial number is because its not at my apartment right now, that i haven't used a whole lot in a few years. I have just gotten into upgrading it and am looking into an ETrigger. I read somewhere that the the ETrigger with the WAS Equalizer board won't fit into some of the older models...But it didnt say whether the APE Rampage board would fit.

my question is that because of my older model, would i need to drop in an etrigger without many problems? or would i have to try to find an old, used ebolt?

[Lipi]

Hello everyone!
I'm having a little bit of problem on my T98C. I've put in a double trigger for myself (it was put in at a field by someone as well, same problem). I've got no HPA home right now, but when I try to cock my marker while pulling the trigger, it won't cock how it needs to, won't be able to shoot, I have to release the trigger and cock it again. When we tried it with gas on the field, the only thing we noticed was when it shot one, we had to cock it again because the bolt stopped before coming back 100%.
I hope you can understand my problem and help Thank you in advance!

[EnigmaticKid]

Hi I'm a new member I was wondering if the barrels threads for the 98c and custom pro are the same?

[EnigmaticKid]

Another question is there anything major that sets the custom pro and 98c apart performance wise? and I'm looking in to getting a Tribal stix barrel.