shadowboy91

i got my a5 and nothing good has come from it. i have another problem with it. it has a slow leak and i don't know how to fix it. any suggestions????

Smitty

Without more details, no.

__________________
Rate my Gun
Smitty's Feedback 5+/0-
I DONT SHIP FIRST~~Unless you have good PaintBallForum.com feedback.
I could give 2 sh*ts about any feedback from the nation
or somerandom13memberPBforum.com

shadowboy91

it shots fine but i hear the leak and it worries me

SWATORNOT

In order for you to recieve the proper help you need you have to give us more details....where is the leak from, when did it start...upgrades list ect.


Untill we have any of this we cannot assist you any further

paintthecatBLUE

first of all, where is the leak coming from? if it sounds like it is coming out of the power tube/back of the gun then your tank may be empty. believe it or not the orings will not seal below a certain pressure and if the gun is not cocked, the rear bolt will be resting on the valve pin holding the valve open. if your tank is full and its coming out of the front of the gun, take the tank out, put 4-5 drops of oil in the hole in the asa, screw tank back in and dryfire about 20 times. check your hoses, you may need to take them off and wrap them in teflon tape. if the leak is coming from the cyclone feed, i dont know enough about a-5s to tell you how to fix it...

shadowboy91

a5 with e-grip


it sounds like it is coming from the valve

SWATORNOT

From the valve?? where on the marker does the leak seem to be coming from.. Around the ASA-Tombstone? out of the barrel? from the reciever halves?

shadowboy91

near the rear velocity adjuster

it gets worse when i cock it

SWATORNOT

Have you checked your O-rings on the internals?

paintthecatBLUE

stop asking questions, let him explain it on his own. if he wants help he will ask his own questions and give us more details than that

look if you just say "my gun is leaking omg fix it thx bye" we're not going to help you. the more details you give us the more we can help you and the sooner you can get your gun fixed.

edit: so you posted while i was typing this but read that for future reference ^

shadowboy91

i'm gonna take it apartr now and look

SWATORNOT

Just make sure your remember EXACTLY how parts came out so you put them in the same way. or it may get worse than an air leak problem

shadowboy91

when i took it apart the first time i was left with an allen wrench screw thingy

that cant be good

SWATORNOT

IF you dont have a manual (which i hope you do) then go to tippmann.com and download the manual from there site

shadowboy91

i got manual just can't find it now

shadowboy91

almost got gun apart

shadowboy91

it's apart what now

SWATORNOT

Are there any O-rings around the internal parts like the bolt or power tube> ( Iam new to the tippy myself so bare with me).

shadowboy91

o-ring around bolt but not power tube

SWATORNOT

OK look it over REALLY good see if its worn or torn any where...make sure its sealing up like it should on the inside of the reciever halves