Thread Tools

**Impy28190** · July 27th, 10:53 AM

I believe it is a completely stock speed. It's going for 500. LMK

**BunkerMonkey** · July 27th, 11:50 AM

Yes, most used speeds go for around 600, just make sure you have a LP output tank.

**OaklandDogs187** · July 27th, 12:08 PM

Get it brandon! You can let me do a little project called was/ace. I'll have fun!

haha.

Brandon

**Impy28190** · July 27th, 12:31 PM

Quote:

Originally Posted by BunkerMonkey

Yes, most used speeds go for around 600, just make sure you have a LP output tank.

Sweet, thanks, I already have a Low Pressure Crossfire right now so that should work well I'm hoping.

**BunkerMonkey** · July 27th, 12:41 PM

Use edit button next time.

LP Crossfire tanks work pretty well on speeds.

**Impy28190** · July 27th, 12:55 PM

Quote:

Originally Posted by BunkerMonkey

Use edit button next time.

LP Crossfire tanks work pretty well on speeds.

what's the speeds operating pressure?

**BunkerMonkey** · July 27th, 01:20 PM

Mine is currently at 65psi, they operate at 80 out of the box.

**Impy28190** · July 27th, 02:38 PM

Quote:

Originally Posted by BunkerMonkey

Mine is currently at 65psi, they operate at 80 out of the box.

Ok thanks a lot, if you can give yourself a rep point do it. Lol, I'd drop you one if I were a mod.

**j_dogg** · July 27th, 03:34 PM

Bunker, ian't that the LPR pressure? I know Speeds run at sub 200 psi, but that's a little low.

**Impy28190** · July 27th, 04:13 PM

Quote:

Originally Posted by j_dogg

Bunker, ian't that the LPR pressure? I know Speeds run at sub 200 psi, but that's a little low.

ah, i knew something was a bit fishy...

**BunkerMonkey** · July 27th, 10:57 PM

yes it is the OPERATING pressure, the input from the minireg to lpr is usually 180-350, input to minireg usually 400, but the actual operating pressure is what you see on the gauge when screwed into the LPR side. Dont mix up operating pressure and input pressure.

**Impy28190** · July 28th, 11:41 AM

Quote:

Originally Posted by BunkerMonkey

yes it is the OPERATING pressure, the input from the minireg to lpr is usually 180-350, input to minireg usually 400, but the actual operating pressure is what you see on the gauge when screwed into the LPR side. Dont mix up operating pressure and input pressure.

mmk, thanks a lot

**SunTzu** · July 28th, 04:08 PM

wasnt the operating pressure of the speed around 250-175 as the ad says?

so this also operates the pressure of the LPR whish tunes it down to 50-80 psi

dunno really but if you hear most people talk abbout operating pressures its usually around 170-200ish for LP guns and LPR pressure is something diff, plz drop the knowlegde on me if im mistaken

**BunkerMonkey** · July 28th, 04:25 PM

A lot of people will talk about the 180-300 by what is the input into their guns, but what is operating the gun which is the final pressure passed through the valve is post LPR pressure, a lot of people will mix up that operating pressure with the input pressure into their gun cuz they dont have a way to measure the post lpr pressure. But yes most people will tell you their operating pressure as the input pressure.

**j_dogg** · July 28th, 11:20 PM

Yeah, that's what I consider to be the operating pressure, the input pressure, as it operates the whole gun. But I see your point bunker.

**Impy28190** · July 29th, 02:14 PM

eh, whaty kinda ups will i need for this?

**OaklandDogs187** · July 29th, 03:32 PM

Ultralite, CCM Clamping feedneck, was/ace, window mod, unimount, 45 frame...

Brandon

**Impy28190** · July 29th, 04:22 PM

Quote:

Originally Posted by OaklandDogs187

Ultralite, CCM Clamping feedneck, was/ace, window mod, unimount, 45 frame...

Brandon

eh...or do i just go with the gz...

**OaklandDogs187** · July 29th, 05:38 PM

Quote:

Originally Posted by Impy28190

eh...or do i just go with the gz...

Speed, it's worth it if you get the demon mod from warped sports, 275.

Brandon

**Impy28190** · July 29th, 05:53 PM

or if i can't afford the demon mod eh.