Paintball Guns and Gear forums banner

Proto SLG Leak

3K views 11 replies 3 participants last post by  Trbo323 
#1 ·
My 2010 slg nas a leak around the bottom of the regulator, what should i look for? it isnt a bad leak, but still. thanks.
 
#8 ·
Ok so I fixed it today and we played, like you said i just wiggled the line and pushed it in a little and it was fine. but i noticed that it wasnt shooting as fast or every trigger pull. last time i had this problem i lubed it all and it was fine, however i lubed it today and it didn't do anything. i did use a not paintball brand lube... any ideas? thanks.
 
#11 ·
no, oil definitely isn't, but if it's molykote 55 (dow-corning 55), then it's designed to slightly swell orings for a better seal. However, because the orings in your SLG need to move, swelling them will cause drag, which will cause velocity issues. Better to use a thin synthetic lubricant.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top