Tacamo Arc Dual Feed Port Hopper - Paintball Forum - Paintball guns and gear forums

Reply

Old March 5th, 2011, 02:13 AM   #1 (permalink)
Registered User
 
Join Date: Feb 2011
Posts: 4
Blog Entries: 22
Talking Tacamo Arc Dual Feed Port Hopper

This is the NEW and IMPROVED version of this revolutionary hopper! People talked and they were heard.

http://www.rap4.com/paintball/images...per_ALL_10.gif

A lot of time was spent on getting the design and engineering perfect for this Revolutionary New Patented Hopper Design! This hopper can feed up to 11.6 BPS (Balls Per Second)! That is much faster that some agitated hoppers that only feed 8 BPS. Only this hopper has no moving parts! That is right! No batteries to go dead. No electronics to go bad. No motor to burn out. No noise! And that is not all. This hopper also holds a lot more paintballs than the agitated hoppers, This hopper holds over 200 rounds most agitated hoppers only hold 140 rounds to 180 rounds. It even holds more than the VL200!

This hopper works with dual feed ramps (see how it works below) inside the hopper allowing the paintballs to feed into your marker without any down-pressure from the paintballs above, this also doubles (more like triples) the "catch area" (how much area that there is for a paintball to be fed into your gun).

Another problem with regular hoppers when used with blow-back style markers is that the paintballs in the feed-neck are pushed back up into the hopper from the blast of air that is shot up the feed neck with every shot. This new design blocks the paintballs from leaving the feed-neck and therefore leaving a gap between the paintballs as they try to feed into your gun. This new design greatly increases the reliable feed rate of this hopper to extreme levels!

- With no noise of a motor running all of the time you can set up a true ambush and really surprise your enemy.

- This hopper is also a LOT lighter than an agitated hopper because you don't have all the extra weight of the batteries, motor, and electronics. All of that stuff also takes away from the amount of paintballs it can hold.

- This hopper will fit any standard paintball marker. These hoppers really work! Give one a try. It will be the best investment you have made!

- Only this hopper has no moving parts!

- A lot of time was spent on getting the design and engineering perfect for this Revolutionary New Patented Hopper Design!

- Improved lid design! Even if you already have an agitated hopper get one of these as a backup. Because when the batteries die the hopper also dies.

- This is by far the BEST Bang-for-your-Buck hopper on the market!

Comes With:

- 1 ALL NEW & Improved, Revolutionary 200 Round Gravity fed hopper from Tacamo.
__________________
Hi , I am from RAP4,Real Action Paintball, a big paintball seller and manufacturer ! We started from a very small company and grew through the process of development. We are now have a big piece of cake in the paintball market, always try to launch the new products, to make progress, to serve all the paintball lovers good products with good prices and good quality, that is our goal!!!
zhu juliet is offline View My Blog!   Reply With Quote
Sponsored Links
Advertisement
 
Old March 5th, 2011, 11:53 AM   #2 (permalink)
Super Legit
 
Trbo323's Avatar
 
Join Date: Nov 2006
Location: Washington
Posts: 14,001
its a gravity hopper, doesnt matter what you do or what you call it, it still relies on gravity and you still need to shake it, because im bored lets look over some of these wonderful sales points shall we?

Quote:
Originally Posted by zhu juliet View Post
- With no noise of a motor running all of the time you can set up a true ambush and really surprise your enemy.
so can you with anything that is not a constant agitator

Quote:
Originally Posted by zhu juliet View Post
- This hopper is also a LOT lighter than an agitated hopper because you don't have all the extra weight of the batteries, motor, and electronics. All of that stuff also takes away from the amount of paintballs it can hold.
you also dont have the ability to reliably feed

Quote:
Originally Posted by zhu juliet View Post
- This hopper will fit any standard paintball marker. These hoppers really work! Give one a try. It will be the best investment you have made!
except for the part where you are replacing one shake and bake with another!

Quote:
Originally Posted by zhu juliet View Post
- Only this hopper has no moving parts!
and every other gravity hopper out there!

Quote:
Originally Posted by zhu juliet View Post
- A lot of time was spent on getting the design and engineering perfect for this Revolutionary New Patented Hopper Design!
you took a shake and bake and put a tray in the middle.....not to mention who cares if you took 5 min or 5 years getting it right, a crappy idea or product is still a crappy idea or product

Quote:
Originally Posted by zhu juliet View Post
- Improved lid design! Even if you already have an agitated hopper get one of these as a backup. Because when the batteries die the hopper also dies.
and then you replace the batteries! whow! crazy right?

Quote:
Originally Posted by zhu juliet View Post
this is by far the BEST Bang-for-your-Buck hopper on the market!
except for the part where its not! its another hopper thats basically a tupper ware container that has a neck and relies on gravity to get the paint into the marker
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


^^^If you are new, click here^^^


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

^^^ Putting together your tool bag?? Click here! ^^^

Last edited by Trbo323; March 5th, 2011 at 12:04 PM..
Trbo323 is offline View My Blog!   Reply With Quote
Old March 5th, 2011, 12:33 PM   #3 (permalink)
Established member
 
tlmiller's Avatar
 
Join Date: Oct 2004
Location: AZ, USA
Posts: 9,221
Archon released this 2 years ago...as far as I can tell, it's identical to Archons 2 year old design.

And it does improve feed rate of gravity hoppers, so if everyone went to this design instead of a STANDARD shake-n-bake in the low end packages, it would be nice. However, at the end of the day, you do occassionally still end up having to shake these to get them to feed. However far less (I did actually buy one just to test the claims).
__________________
Yes, I have long since accepted that I have issues, with that said, here's:

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
tlmiller is offline View My Blog!   Reply With Quote
Sponsored Links
Advertisement
 
Old March 5th, 2011, 01:14 PM   #4 (permalink)
That Dude!
 
Affishu's Avatar
 
Join Date: Jun 2009
Location: New Jersey
Posts: 257
I owned one about a year ago and every now and then you had to shake it.
__________________
Dangerous Power Threshold
Fep Quest
Bob long Vice
Autococker Pump
2k3 E1
Affishu is offline View My Blog!   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


VerticalSports
Baseball Forum Golf Forum Boxing Forum Snowmobile Forum
Basketball Forum Soccer Forum MMA Forum PWC Forum
Football Forum Cricket Forum Wrestling Forum ATV Forum
Hockey Forum Volleyball Forum Paintball Forum Snowboarding Forum
Tennis Forum Rugby Forums Lacrosse Forum Skiing Forums
Copyright (C) Verticalscope Inc Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc. Search Engine Optimization by vBSEO 3.6.1