Marker help - Paintball Forum - Paintball guns and gear forums

Reply

Old June 3rd, 2017, 04:13 PM   #1 (permalink)
Michael
 
Join Date: May 2017
Location: Indiana
Posts: 8
Marker help

Have smart parts eos. Does not leak air has new battery nw o rings every where new macro line and fittings. When I air it up where the psi is supposed to be pull trigor don't shoot at all does nothing. If I lower psi to 80 it will start to fire but very inconsistent and if I pull trigger to fast bolt loses pressure have to turn air back up then down to fire has a fire bolt in noid does not click or make any sound when I pull trigger without air in with eyes on or off. Any ideas replaces o rings in reg and greased it well.
Kaosking is offline View My Blog!   Reply With Quote
Sponsored Links
Advertisement
 
Old June 3rd, 2017, 05:20 PM   #2 (permalink)
Authoritah!
 
martix_agent's Avatar
 
Join Date: Nov 2004
Location: Lafayette, Indiana
Posts: 23,645
http://www.p8ntbox.com/manuels/EOS.pdf
Looks like your operating pressure should be around 260psi, and no higher than 280psi.

I assume that you're changed the orings on the bolt and greased them properly? If so, it almost sounds like your high pressure regulator needs to be cleaned, repaired, or replaced. It could also be that your pressure gauge is not operating correctly.

Another really easy thing to do is a factory reset on your board. You could have some sort of crazy settings that were accidentally changed. I would try doing this first.

If orings and the board reset doesn't work, you can try to see if there's something plugging up your solenoid, as described here It's a thread about an ION, but the EOS is pretty much the exact same thing.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
martix_agent is offline View My Blog!   Reply With Quote
Old June 3rd, 2017, 05:25 PM   #3 (permalink)
Authoritah!
 
martix_agent's Avatar
 
Join Date: Nov 2004
Location: Lafayette, Indiana
Posts: 23,645
here's how to do regulator maintenance.


and solenoid maintenance, as well
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
martix_agent is offline View My Blog!   Reply With Quote
Sponsored Links
Advertisement
 
Old June 3rd, 2017, 08:24 PM   #4 (permalink)
Michael
 
Join Date: May 2017
Location: Indiana
Posts: 8
I've done all u said and I think reg is good I replace all o rings in it and greased it good also the pressure goes up and down when I turn it up so I doubt it's bad think it's the noid it don't make any noise when I pull trigger without air hell idk my first gun so don't know lot about them have read every thing on Web.
Kaosking is offline View My Blog!   Reply With Quote
Old June 3rd, 2017, 08:30 PM   #5 (permalink)
Michael
 
Join Date: May 2017
Location: Indiana
Posts: 8
Pretty sure my reg is a low pressure not positive though. Mine is totally different then the on in video it's a flow max r something like that it's stock I know that
Kaosking is offline View My Blog!   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


VerticalSports
Baseball Forum Golf Forum Boxing Forum Snowmobile Forum
Basketball Forum Soccer Forum MMA Forum PWC Forum
Football Forum Cricket Forum Wrestling Forum ATV Forum
Hockey Forum Volleyball Forum Paintball Forum Snowboarding Forum
Tennis Forum Rugby Forums Lacrosse Forum Skiing Forums
Copyright (C) Verticalscope Inc Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc. Search Engine Optimization by vBSEO 3.6.1