Paintball Guns and Gear forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
ok guys help me out. Here's my problem. my electra eyes flash after the first trigger pull. The gun is 3 days old. 9.6 volt battery with full charge. The gun seems to be firing the same with eyes on or eyes off. I know they aren't supposed to flash nor are they supposed to let the gun fire if it doesn't register a ball. Eyes are spotless. I don't know if eyes are even working or registering with the board. The eyes continue to flash after i have stopped firing. if i turn the gun off and back on the eyes are solid until i fire again. I have an egg III hopper that is workig fine. It does this in all three modes. I have checked eye connection and no change. taken eyes out and cleaned. one eye is clear and the other one is black. I have read other threads about this but never a solution posted. any help would be great.
 

·
Paintball?
Joined
·
7,646 Posts
You might have a bad connection on your board or a short
Besides that, your eye wires may be pinched

Send it back for a replacement since it should still be under warranty
 

·
Registered
Joined
·
8 Posts
Discussion Starter #3
Kingman finally answered the phone and I had them send me new eyes. The wires were loos inside the connector. Works good now.
 
1 - 3 of 3 Posts
Top