Paintball Guns and Gear forums banner
1 - 14 of 14 Posts

· Registered
Joined
·
107 Posts
Discussion Starter · #1 ·
old pics but they will have to do :D

tessy
tessy

spec's

black/green t.e.s
s/t super fly bolt
polished striker
boblong 1200psi guage
maddman spring kit
freak jr w/ 2 inserts
egg2 w/ y board (moded impeller 20bps)
bodger moded switch
trigger mod
coustom painted grips
 

· Registered
Joined
·
41 Posts
loads you can do..... first get a clamp low rise, thats a def.. then a different inline reg b/c i don't like those... get a cp reg. other than that its cool..
also show me the mod you did to the impeller.... cause you should just a z-board....... what could you hav done tho
7/10 for all guns
 

· Registered
Joined
·
343 Posts
Nice gun. I am regretting not having waited and bought the one now because it is only $250 at a few websites.

Or maybe I should have bought a TES.

How are the dragun eyes? I am using a one kit with a spudnuk'l bolt all installed in some pos body I had lying around.
 

· Registered
Joined
·
686 Posts
7/10.... its a good gun, but is that red paint on your grip?
 

· Registered
Joined
·
107 Posts
Discussion Starter · #11 ·
TheConMan41 said:
7/10.... its a good gun, but is that red paint on your grip?
if u look closer its the dragun logo

""Why do you have to change the reg if you change the drop?""

becuz dragun made weird threads for the air fittings witch means if i get a new reg i need to change the asa (there is no metric to standerd adaptors for this so dont ask)
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top