Paintball Guns and Gear forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
Even when the velocity screw is all the way out or in, all I ever get is around 225-230fps. Any ideas? I've tried different tanks, cleaning/oiling the gun, etc..
 

·
Registered
Joined
·
15 Posts
Discussion Starter #4
1) Using Co2
2) It is screwed all the way in with no leaking sounds
3) The velocity screw can be all the way in or almost all the way out. I have tried different positions and backing it out slowly and getting about the same velocity
4) Cleaned the gun right before going play paintball the day before
5) The batteries seem to be fine because everyone else crono just fine
 

·
Registered
Joined
·
1,449 Posts
are you using a regulator in your setup?

check your paint/barrel bore match... if your paint is too small, co2 will escape around it and loose momentum; if your paint is too big, it'll drag on the barrel.
 
1 - 5 of 5 Posts
Top