Paintball Guns and Gear forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
Alright, I have got a tourney this weekend and when I took out my gun to make sure it was working I found out that it is leaking air. I have replaced the front bolt o-ring and shot some oil through the gun but to no avail. It is leaking air out of the barrel and from the bottom where the air line is. I havent had time to tighten the gas line but I wouldnt think it would be that because there wouldnt be air coming out of the barrel. The only thing I can think of is that there may be something wrong with the valve. I will be gone all day but hopefully I will maybe be able to work on it tonight. If anybody has any suggestions or ideas that might help it would be greatly appreciated.
 

·
Registered
Joined
·
14 Posts
Discussion Starter #3
Yes, I oiled pretty much everything before I tested it and found out that it was leaking. I will probably try and call Tippmann on Monday to get a replacement valve. I just hope I get it by the tourney on Sat and that it was the valve that was leaking.
 
1 - 3 of 3 Posts
Top