Paintball Guns and Gear forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
49 Posts
Discussion Starter #1
Hey
I just bought an A-5 and have been setting it up. I had to but in a berrel adapter to adapt my spyder barrel. Anyway, using a full tank, every 5 or so shots the bolt double fires. it doesn't have to be recocked or fixed after, it just double fires the bolt while only pressing the trigger once. it does not have a responce trigger, the only thing i have added on is the barrel adapter which replaces the thing you screw your tippmann barrel into. When i use a tank that is low on air or half ful, it doesn't do this. Also, is there supposed to have gas come out of the trigger when i fire?
Jeep1950
 

·
Screaming Koala
Joined
·
4,685 Posts
Barrel adaptor shouldn't be causing that.

It might solve nothing, but put a few drops of oil in the ASA and dry fire the gun (air only, no paint) a few dozen times. It's also good to take the barrel off before doing this or it'll get oil spray all over the inside of it.

The air coming from the trigger area isn't a problem. It's just waste gas from the blowback action. It takes the easiest path out of the body it can find.
 
1 - 3 of 3 Posts
Top