Paintball Guns and Gear forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter #1
So my mini is starting to get my tanks stuck in the asa. My ans tank actually began to unscrew where the metal part screws into the fiber wrapped tank body (I'm way too tired to think of what these pieces are actually called). If this goes on much longer ill have to use a pipe wrench to remove tanks from my gun. Keep in mind that these tanks are screwing onto the gun easy as pie with no noticable sticks. Any thoughts/ suggestions would be helpful. Thanks
 

·
Registered
Joined
·
38 Posts
Discussion Starter #3
That is really not what I wanted to hear, but thanks for the input. hopefully its a relatively simple fix. Ill take it in tomorrow and see what they say at the shop.
 

·
Registered
Joined
·
38 Posts
Discussion Starter #4
okay. so I talked to the guy at my proshop today and he suggested cleaning out the asa threading with a metal pick because sometimes littles metal chips can break off and get jammed in the threads. I used a toothpick and sure enough, there were several metal flecks. problem solved.
 
1 - 4 of 4 Posts
Top