Paintball Guns and Gear forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
71 Posts
Discussion Starter #1
my a5
upgrades
cyclone fully upgraded (got the cyclone upgrade at rap4)
jcs red power tube
hex front bolt (dosent do anything as far as i can tell)
polished internals
ak47 barrel kit with 18in rifled barrel,stock and rail kit
tri mount riser
red dot sight
offset hopper(didnt like the lid system on the off set hopper,so i cut it off and added a stock hopper lid system to it)
bigger barrel muzzle over the stock muzzle plus the porting on the stock barrel
custom parts
magazine
butt stock
hopper lid
things coming

1/8 NPT 45° Elbow......thanks lucas for this part
R/t trigger ................on its way
fang trigger ..............havent got to this point yet
apex2 and barrel or a barrel that takes inserts...........havent got to this point yet


this is a real sks magazine i got from my little bro



had to file it a little so it fit




http://img593.imageshack.us/img593/7559/a5magmod9.jpg[img]
[img]http://img132.imageshack.us/img132/416/a5magmod10.jpg
 

·
Registered
Joined
·
71 Posts
Discussion Starter #2




the little mod i did to the stock


a little mod i did to the hopper lid system

 

·
Registered
Joined
·
71 Posts
Discussion Starter #3
just some more pics of the mag





removed the 14in stock barrel and replaced it with a 18in rifled barrel,had to file the hell out of it as well as all the parts of the barrel shroud that the barrel go's throw,except for the one closest to the barrel adapter had to be totaly be removed


the tip of the barrel to see whats going on with the muzzles

 

·
Registered
Joined
·
71 Posts
Discussion Starter #4
the 45 elbow (thanks to lucas )


have to pull out the putty

every thing back together

a little look at the rifled barrel


kinda finished
 

·
Banned
Joined
·
14,001 Posts
wow nice work, i love custom stuff like this

just a FYI on your future stuff though, the barrel kit and apex idea doesnt really work together, you will still gain a little efficiency but the accuracy gained by a kit is demolished as soon as you put spin on the ball, so usually its good to have one or the other but both you are just spending extra money for nothing really

any other custom bits planned?
 

·
Registered
Joined
·
71 Posts
Discussion Starter #6
wow nice work, i love custom stuff like this

just a FYI on your future stuff though, the barrel kit and apex idea doesnt really work together, you will still gain a little efficiency but the accuracy gained by a kit is demolished as soon as you put spin on the ball, so usually its good to have one or the other but both you are just spending extra money for nothing really

any other custom bits planned?
ahh trbo,cool to know about the barrel inserts vs the apex what would you say you would kinda go for,iam a woodsballer as you know so if you could aim your answer in that direction i would appreciate that

future plans
i might build out the body with jb weld so looks just like a ak47 body but ive done no test at all on the idea
 

·
Banned
Joined
·
14,001 Posts
i go full performance so id take the inserts, once you start putting spin on the ball you have bad accuracy, refiling also does nothing for paintball (some argue that it hurts, i cant say i completely disagree with that)

woodsball or speedball or rec ball, doesnt matter the marker will preform the same, i play about 90% woodsball but i sure look like i belong on the speedball field. i play with a CF barrel that uses inserts, love it.

btw, love the disco ball in the background
 
1 - 7 of 7 Posts
Top