Paintball Guns and Gear forums banner

1 - 9 of 9 Posts

·
Bringer of large farts
Joined
·
2,370 Posts
Discussion Starter #1
what spyder (or cheap....i dont care WHAT they interface with....im creative and have a electrical engineering major for a roommate) has an adjustable dwell? ill take just about anything , but preferably pretty small and not requiring and LCD. i want to use it for a spimmy and custom mag application
 

·
Registered
Joined
·
4,779 Posts
if i'm not mistaken you can't really adjust dwell on a spyder. since a spyder is a blowback, the only adjustment that can really be made is how long the selenoid is held open(tripping the sear). dwell has to do with how long the bolt stays foward before going back again.
 

·
Registered
Joined
·
410 Posts
spyder doesnt have dwell because it does not have a solenoid that controlls air, all the spyder solenoid does is trip a sear
 

·
Almost leet
Joined
·
1,999 Posts
mostly on high end guns have adjustable dwells through the board.
e-cockers,angels etc have adjustable dwells.

some mid end guns migh also not sure.
 

·
Registered
Joined
·
11,482 Posts
on the t-board which was originally made for spyders dwell simply determined how long the sear would be down. Which really didn't effect squat.

so t-board which might not run a spimmy, and predator board are both good. Pred is like the swiss army knife of boards, it works in anything if u can wire it up. Both come w/ eyes.


have u guys heard? t-board for the ion is a posibility!! Might come w/ new noid too..
 

·
Bringer of large farts
Joined
·
2,370 Posts
Discussion Starter #7
I understand what dwell is, i wouldnt be trying to build custom projects that cost many hundreds of dollars if i didnt.

i knew the t-board may get the job done, ive seen a few people running timmy conversion off them. any idea what the might run(fixing to go look at ebay). thanks for the suggestion :) i was more interested in other boards that might have adjustable dwells(like i said ANYTHING not just a spyder). was thinking about maybe one of the WAS boards or another non-lcd timmy,angel,whatever board
**edit didnt know it came with eyes though. its definetly in contention for the board i start with till i can afford the predator(knew about it but dont have 140$ to d)rop right now

ibreevesii- why on earth would i want an ion when al i need to finish my mag and take a huge chunk out of a completely custom intimidator(my goal- lets see just how light we can get an intimidator.....and how cheap while maintaining quality) is a board and a microswitch to fit the vert frame i just bought???? that would be liking using garbage can lids and pots for a drumset when you bought a brand new set of maple customs.........
 
1 - 9 of 9 Posts
Top