Paintball Guns and Gear forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
116 Posts
Discussion Starter #1
ok, i want something that will make my xtra stop chopping and sputtering on a full tank. i am not getting a new barrel cause i am getting that for my tippman. i was thinking a bolt would help this. but, first just to make sure wat exactly does a BETTER bolt really help about my marker? if so, wat would be the best bolt for my xtra that i can get from action vill.?
 

·
Administrator
Joined
·
23,657 Posts
chopping and sputtering? that's a new one on me. sounds liek it's havinga re-cocking problem. maybe there is a clogged line or something so it can't re-cock. check that out first. oil up the o-rings and polish up the bolt and striker. if that doens't help look into getting lighter springs.
 

·
Registered
Joined
·
506 Posts
if that doesnt' help, get a Kingman ACS bolt
 

·
Banned
Joined
·
553 Posts
most likely the sputtering is causing the chops so here is some things that might be wrong.

1. need new sear spring
2. abraision on hammer/bolt assembly slowing it down
3. main spring is too stiff
4. sear is worn alot
5. hammer oring is dry

(these are in no particular ordes)
 
1 - 4 of 4 Posts
Top