Paintball Guns and Gear forums banner

1 - 8 of 8 Posts

·
Number One Target
Joined
·
373 Posts
Discussion Starter #1
I have taken my steel line off of my valve because of some complications that needed to be fixed. Now I am about to put it back on and Im not sure if I should use locktite or tyflon tape, or a combination of the two. Can anyone help me out?


Thanks
 

·
Registered
Joined
·
413 Posts
I would use locktite.
 

·
Screaming Koala
Joined
·
4,685 Posts
Don't combine them.

Loctite will work fine, or teflon tape will work too. I use tape now, but I used loctite when I first started taking the marker apart because it was just what came with it. The loctite can have the advantage because it won't let the line twist and possibly start to leak.

Either way, just make sure the threads are clean before you start and if you use the loctite, give it time to cure before you put pressure to it.
 

·
Registered
Joined
·
413 Posts
tippyninja said:
wher did u get ur locktite? i need some...
Home Depot, Lowes, Ace, or anywhere like that.
 
1 - 8 of 8 Posts
Top