Paintball Guns and Gear forums banner
1 - 12 of 12 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I have one brand new mini with 1000 rounds through it, and it will not even air up the marker and when it does it leaks through the barrel... help...

I have also bought 2 other mini's last June and I just bought 2 new Freak sets (cocker thread) and they do not fit the gun.. but they will fit the one that is broke..... it seems like that the body was not milled out enough to get the freak back to slide into the marker. We now have tried other cocker thread barrels and they do not work either. can anyone lead me in the right direction or phone number to someone who can..... I am getting very FRUSTRATED with these markers... even though I do love them and love how they shoot with the stock barrrel (only).....

thanks for any Help......
 

·
Registered
Joined
·
6,346 Posts
Try some lube on the bolt o-rings(if it has any, if not try lubing the bolt itself), that always has fixed my bolt leaks.
 

·
Registered
Joined
·
178 Posts
if you are still having issues you can call KEE directly at 1-800-220-3222.
 

·
Registered
Joined
·
178 Posts
Try resetting the poppit by moving the velocity adjuster all the way in and then back out. Also reset the ASA/Reg the same way.
to reset the noid you need to pull the trigger with eyes off and click it about 50-100 times. the asa shouldn't be affected unless his pressure is way off.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top