Paintball Guns and Gear forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
I bought a 360 QEV from a reputable seller on eBay. I have a SP Ion. After install (replacing the middle banjo) I get a huge air leak and with that the bolt moves to the forward position. After some inspection and experimenting it seems that the air leak is coming from the little hole next to the threaded connection on the QEV. I think this hole is the exhaust port. It doesn't seem like air being pushed through the barb side is creating the seal it should. Blowing through either side of the 360 QEV produces the same effect, air comes through the exhaust port. I put the stock banjo back in place (a bit of a stretch since I cut the tube for the QEV) and everything works and shoots fine. I disassembled the QEV, and noticed nothing strange, but I also don't know what parts it should have if it were working.

Any thoughts on how to fix? Is it even broken?

Thanks.
 
1 - 1 of 1 Posts
Top