Paintball Guns and Gear forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Ok, its been a long while since Ive used my gun, and actually, I think Ive only used it once since I got it a year or two ago. Anyways, Ive never cleaned it, or taken it apart to or anything, was just wondering how hard it is to do this, and how I would go about doing it? I have the 98 Tippman Custom, all stock. Thanks guys.
 

·
not really named bob...
Joined
·
2,368 Posts
a 98 doesnt really need much matnience. just put a drop on the bolt then pull it back(cock it) and put a couple in the opening that appears. then put a couple drops into the asa(were the tank screws in) and dry fire(with co2 but without paint) around 20 times. after that it should work perfectly.
 

·
shine on.
Joined
·
10,745 Posts
Take the gun apart and oil the bolt orings and any oring you see. If there is paint in the gun, wipe it down. Put it back together and drop some oil in the ASA and shoot a couple times (without barrel on).

That is really all you need to do, and you don't need to do it that often.
 
1 - 7 of 7 Posts
Top