Paintball Guns and Gear forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
201 Posts
Discussion Starter #1
so there's a cure 3 bolt??? will it fit a standard etek2? it says it fits all previous egos butt requires the fitment of the standard pin of your existing bolt. so does anyone know if it will fit an etek2?
 

·
Premium Member
Joined
·
9,222 Posts
Yes, it will fit. They just made minor changes, all Ego/Etek bolts are identical in length/bore size, so are completely interchangeable.

However, if you already have Cure 2, I wouldn't recommend it, as it's not a HUGE upgrade, very minor. If you have a standard bolt, I'd recommend it most definitely.

By utilizing the latest technology in High Speed Video Imaging we have been able to further refine the already outstanding Cure2 Bolt for the Eclipse Ego.
The Cure3 allows for perfect positioning of the ball in the breech for every shot, and the new upper ramp profile offers 2 distinct improvements over its predecessor.
The first is that is further reduces the impact of the second ball in the feed stack and the subsequent compression of all the balls in the stack above it.
And secondly, it allows faster load times as the stack is already partially lowered into the breech as the bolt starts to retract meaning a shorter drop distance and time during the loading phase of the cycle.

The Cure3 Bolt will fit all previous Egos, but will require the fitment of the standard pin from your existing bolt.
Spare Plunger and Spring Included.
 

·
Registered
Joined
·
201 Posts
Discussion Starter #3
k sweet. i still have my stock bolt. and they are selling the cure 3 cheaper than the cure 2 so i think im gonna get one. thanks, tlmiller
 

·
Registered
Joined
·
6,346 Posts
and detents.
 
1 - 5 of 5 Posts
Top