Paintball Guns and Gear forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
119 Posts
Discussion Starter #1
I just upgraded my cyclone system by watching the video on youtube but now it's not auto loading. If I use the reset button, I can advance the balls one at a time so I did something right. Can anyone suggest what I might have done wrong?

Looking at the mechanism, I'm not even sure what drives the paddles.

Please help

Thank you
 

·
KRAKEN! KRAKEN! KRAKEN!!!
Joined
·
1,298 Posts
You get the air hose hooked back up?
 

·
Registered
Joined
·
119 Posts
Discussion Starter #3
that rubber hose thing? (the "banjo" the only thing that requires a flat head screwdriver then yes. it's connected. is it possible that something inside the gun shifted so something isn't lining up anymore?
 

·
knows whats goin down.
Joined
·
2,615 Posts
If you have a Custom Pro, the power tube is already installed, and you will not need to take apart the marker or drill a hole. But if you have a 98 Custom you will have to drill a hole and install the power tube. Maybe you didnt drill the hole right?
 

·
Registered
Joined
·
119 Posts
Discussion Starter #5
I probably should have mentioned I have an X7 - I'm wondering if that hole shifted so it doesn't line up anymore. I'm at work now so I'll have to check when I get home.
 

·
Registered
Joined
·
119 Posts
Discussion Starter #6
in case anyone was wondering it was the o-ring on the lightning rod. it was on backwards from the factory so the air was going around it.
 
1 - 6 of 6 Posts
Top