Paintball Guns and Gear forums banner

1 - 20 of 45 Posts

·
HRD
Joined
·
2,925 Posts
6.5 get a Nexxus Ram with Qevs, eblade it, clamping feedneck, CP rail, Kapp cocking rod. then you get a 10 from me... actually you need some more stuff but Im going through some stuff right now and I cant think of it.
 

·
Florida's #1
Joined
·
3,863 Posts
7/10
2nd eblade
sam. trigger
Freeflow internals or Nexus kit
If you don't get the nexus kit, get sto ram with trvs or ff ram/ nexxus ram with qevs.
ccm clamping low rise, the "grip"
Halo B or Empire B
Uni-mount or cp rail, if you have the extra ching
Eclipse fanqz ball detent
(don't get a new cocking rod, waste of money)
 

·
0ld Sk00l
Joined
·
3,773 Posts
Kapp Da-bomb 3-way, Freeflow Ram, tickler LPR, Black magic inline, get rid of that steel 3000 tank and get a 68/4500 so u can reuse the nice cover. i'm diggin the opld tigershark you got there, we use to play w/ thiose after we where done reffing at my old field

6/10, pretty much stock cocker, you an do ALOT / it
 

·
Registered
Joined
·
3,172 Posts
8/10

You need a 4500 and some better looking stickeys. Nice collection by the way. Whats the ROF on the cocker? I wish I could recommend more but Im cocker-dumb.
 

·
I Vore You
Joined
·
13,323 Posts
You can probably max out at 10 bps with that set up. If you plan on keeping those grips, put them in the lower hole set, now they look pretty dumb. Here are the ups that I reccomend:

Rock knob
TRVs
barrel kit
Halo B
Cocking rod
New back and fron blocks
CP ball detent
FF internals
Eblade/Worrblade

6 now, 10 with all that I listed
 

·
Banned
Joined
·
543 Posts
do any of you understand that he cant get a clamp rise on that?... The feedneck is not removable. 7 i hate green
 

·
i play for keeps
Joined
·
7,001 Posts
Discussion Starter #15
i had flatliner105 analyze a clip for me, he said i got 10.5 bps, so yea basically 10bps with it.

thanks for the ideas but i plan on keepin it like it is, im not big on tournys so this setup does me well, maybe an eblade kit sometime but for now im happy with my mech.
 

·
Registered
Joined
·
93 Posts
I'm liking the sleek, clean look it has. Plus not to many people have that green anymore.

Could get a TRV for it or some matching Macro line but it's simple and I'm sure it functions well.

7.5/10 for Mechs.
 

·
Registered
Joined
·
593 Posts
7/10
 

·
Registered
Joined
·
33 Posts
i really like that color green
8/10
 

·
Registered
Joined
·
19 Posts
I have to say 8/10 cuz its green and it pretty cool!
 

·
Registered
Joined
·
2,416 Posts
100%Wooddog said:
7/10
2nd eblade
sam. trigger
Freeflow internals or Nexus kit
If you don't get the nexus kit, get sto ram with trvs or ff ram/ nexxus ram with qevs.
ccm clamping low rise, the "grip"
Halo B or Empire B
Uni-mount or cp rail, if you have the extra ching
Eclipse fanqz ball detent
(don't get a new cocking rod, waste of money)
thats all good except for 2 things. sto rams can stick. id go shocktech with trvs. but over that id suggest a belsales ram with qevs. the other thing that is wrong is i heard that eclipse fangs detents+halo b or empire b=soup. go macdev detents or shocktechs rebuildable ones. besides that, nice brick 7/10
 
1 - 20 of 45 Posts
Top