Paintball Guns and Gear forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter #1
Ok well I got the e trigger for my tippmann 98 custom and I am having a little bit of trouble with it so far. First off the red cord that goes the Capacitator is not connected, it was like that when it came out of the package, is that normal? If it isnt how can I fix it? I get everything how it needs to go but I cant get the gun closed completely. What am I doing wrong.

Thanks for reading and I would really appreciate some help. Thanks
 

·
Registered
Joined
·
1 Posts
If you have soldering iron and some shrinkwrap try to attach the wire back to where it belongs, if returning to where you purchased is not a problem. As far as the tight fit there is a cutout for the battery on the left side of the handle frame. Use dremel tool with cutoff wheel to remove. This will take the pressure off and allow you to change battery with out takeing the gun apart. Make sure to read all directions and take note of the positioning of battery wires this can be critical to not pinch or break wireing. Hope this helps ya


CaTFiSh/HARDCORE RELICS
Team Captain/ Aurora Co.
 
1 - 2 of 2 Posts
Top