Paintball Guns and Gear forums banner

1 - 20 of 50 Posts

·
Premium Member
Joined
·
13,027 Posts
Discussion Starter #1 (Edited)
If you need to time your eblade than check here.

How to time your eblade.

--- Take off the right side of the grip frame and hit the red button inside

--- Turn on the eblade and scroll down the menu until you find "TIMG"

--- There are 5 different things,
SON (Sear Solonoid On Time)
CDEL (Cocking Solonoid On Delay)
CON (Cocking Solonoid On Time)
CTO (Cocking Solonoid Time-Out)
COFF (Cocking Solonoid Off Time)

Cycle Time = CDEL + CON + COFF

Max ROF = 1000 / Cycle Time

-------------------------------------------------

Factory Settings

Fast

Son- 004
CDEL- 003
Con- 065
Cto- 255
Coff- 028

10.42 BPS

Medium

Son- 005
CDEL- 006
Con- 075
Cto- 255
Coff- 033

8.77 BPS


Slow
Son- 006
CDEL- 009
Con - 085
CTO- 255
Coff- 038

7.58 BPS

-------------------------------------------------

Custom Settings

Son- 003
Cdel- 003
Con-33
Coff- 19
For a ROF of 17.24 BPS

Son- 003
Cdel - 003
Conn - 015
Coff - 019

ROF- 25 BPS

Change the Conn time above to 20 for 22bps.





Feel free to post your settings.
 

·
Registered
Joined
·
716 Posts
Actually.... you dont turn on your e blade and scroll to timing. You have to open the grip on the side with the battery and hold in the little red button to get to the timing menu. You might want to correct that
 

·
Banned
Joined
·
543 Posts
naughty dogg settings

Son-002
cdel-003
con-030
cto-255
coff-023
FILT
bald-001
empd-002
tpull-004
trel-003

this makes the trigger kinda bouncy so u might want to put the tpull and trel up a bit
 

·
Premium Member
Joined
·
13,027 Posts
Discussion Starter #6
Cerebeus said:
Actually.... you dont turn on your e blade and scroll to timing. You have to open the grip on the side with the battery and hold in the little red button to get to the timing menu. You might want to correct that
I thought that was for the factory settings? o.0
 

·
Registered
Joined
·
416 Posts
Well, it has to be on when you hit the internal access button.
 

·
Registered
Joined
·
347 Posts
Son = 003
Cdel = 004
Con = 025
Coff = 025
ROF = 18.5 bps
form voodoo_14 from pbnation.

With my friends eblade i put the trigger travel screw thingger all the way back so it was barley touching the frame. Then i messed with the magnet position and the other screw next to it, im guessing its the pivot screw. I somehow got it to a position where it activated by just blowing, tapping, or shaking the trigger/marker.

It didnt bounce and the trigger settings were stock. The reason i put this is cause i figured someone may have the time to dick with it to get it that way if they wanted to.

Glad to help at all.
 

·
Registered
Joined
·
51 Posts
Son-003
cdel-003
con-023
cto-255
coff-023
FILT
bald-001
empd-002
tpull-001
trel-002

loads of bounce and very quick
 

·
Registered
Joined
·
72 Posts
how do u adjust your settings?
 

·
Registered
Joined
·
372 Posts
you should get the gun and the eblade before you ask questions.i dont own one but you open the right side grip. press the red button. look for TIMG and then adjust your settings. now, i want you to start reading before you post for now on. it's really pissing me off seeing you post everywhere asking things what have already been answered. please, read, then post.

-brendan
 

·
Registered
Joined
·
716 Posts
titocampos1990 said:
how come in the custom setting there was no cto? (new to cockers)
I know this was an old post but it's because you should always leave the CTO at 255ms. Because the only time it is used is when there is a gap in feeding and that's when you want the extra time for the bolt to be open (you dont want it to close without a ball)

So it always stays at 255...or it's best to.
 

·
Registered
Joined
·
9 Posts
Cocker timing

Quick question: I'm getting my E-blade cocker back tomorrow from the shop. I think the timing on it will be a little slow. If I change the settings on the timing will I need to change anything on the solenoid, and if I do, what do I do? If you know, can you explain to the fullest extent, I have no idea how to fix it. I'm rich and I pay others to do it =P
 

·
Registered
Joined
·
716 Posts
It's all controlled electronically... So if you do make adjustments and you get your eblade all out of whack you can reset it to Factory Fast in the timing menu.
 

·
Registered
Joined
·
146 Posts
so how do u get rid of bounce on your cocker?
tourney coming up this weekend and on the registration form written in big bold red letters ( absolutely no bounce ) strictly inforced any player caught on field with bounce will be diqualafied along with one other team member.
my gats got bouncy bouncy galore..let me know what to play with.. so i am bounce - compliant
ohhh i forgot to mention i get bounce on factory fast have'nt tried factory slow or medium..but i would'nt want to...i'm a back player and need some speed with minimum bounce
 
1 - 20 of 50 Posts
Top