Paintball Guns and Gear forums banner

1 - 9 of 9 Posts

·
role model
Joined
·
158 Posts
Discussion Starter #1
hey guys, just got some air and paint to my ion. After many upgrades and braking down my ion i was shocked when i had no leaks. but when i went to fire it I had a few problems. First off, when I started i was seeing more than one ball at a time coming out. :/. and now its shooting like it does not have pressure. the take is at 2500psi and the gun is reading about 249psi.. seems low. what do I do??
 

·
Paintball?
Joined
·
7,646 Posts
The Ion's HPR should not be adjusted to over 200psi

The multiple balls coming out is a detent problem
Did you upgrade your detents, or are they still the stock rubber nubs?
 

·
Registered
Joined
·
126 Posts
I'd check the dwell and ROF just to make sure. I had an ion and my dwell seemed to always be a problem. Also just check all the o rings in the bolt and regulator.
 
1 - 9 of 9 Posts
Top