Paintball Guns and Gear forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
So, just bought an Etek LT from Zypher sports, take it out of box to play and hear a hissing sound coming from the rammer. Tried replacing the the O rings, but didn't help. Anyone else having this problem? Don't really want to send it back, and its not a very bad leak. I'm out in Germany so it takes 3-6 weeks to ship anything lol.
 

·
Administrator
Joined
·
14,020 Posts
from the rammer? u mean the back cap? the rammer itself doesn't seal any air really.

i dunno if you can do this with the eteks, but with the egos, you could seal the rammer chamber with your thumb to check for a leak there
at rest the ram has pressure pushing it backwards, are you sure its coming from the ram? the noid is just below the ram and if it is getting too little or too much pressure it will vent which would be a simple LPR adjustment
 

·
Registered
Joined
·
22 Posts
I had a leak where the macro meets the regulator, but I just shoved my macro line in there more. That seemed to fix it lol(AMERIIIICAAAAA f*** yeah) i dont know what to do in your siuation.
 
1 - 4 of 4 Posts
Top