Paintball Guns and Gear forums banner

1 - 20 of 34 Posts

·
I was saving that bacon
Joined
·
7,177 Posts
Discussion Starter #1
If anyone is interested in the Evil-M CoolHand from PBN is selling the raw bodies for them on PBN. They also have a few posts on what all you will need to build the Evil-M.

Unfortunately, they do not have a LPR that directly works or a frame. However, they are in the process of getting them done.


So if anyone is interested in this project, feel free to pick up a body and such. However, this will not be a cheap project.
 

·
I was saving that bacon
Joined
·
7,177 Posts
Discussion Starter #3
Yup, the Evil-M was the marker they were working on when SP raped them.

I plan on building two of them. One for myself to keep and one for who know's what. They are $55 a piece, and come tapped for all the holes. There are a couple working ones, but I think I will wait for the LPR's and frames they make specifically for them.

Here is the one he made. However, there are a few different ways of making them work.

 

·
I was saving that bacon
Joined
·
7,177 Posts
Discussion Starter #5
Here is the thread talking about it.

Stacked Tube Viking - PbNation


Here is CoolHands link to the bodys and pins.
EvilM Bodies - FS - PbNation



As far as pricing goes, quick add up...

Body- 55
valve 120
bolt 40
frame- ??250-350?? I guess a lil high, just because.
Lpr- ??100?? Same guess high hopefully lol
eye stuff- 100
feedneck 40
Milling and anno, 300-500.
Plus say 100 for other internals.


So on the low side $1200. More than likely it will be more.
 

·
Registered
Joined
·
6,346 Posts
It was the gun they were making with PE that is now the Ego if I am remembering correctly(My memory is shady on that era).
 

·
Its never lupus
Joined
·
9,169 Posts
If you slightly modify a cyborg LPR that will work.

I've been following the evil m thread very closely. I might purchase a body and keep this as a project for over a period of a few years (don't have the money to shell out all at once).

Thread: Stacked Tube Viking - PbNation

Bodies: EvilM Bodies - FS - PbNation

Parts are:
04 viking Bolt, ram cartridge, bolt pin, eyes, detents, valve, feedneck

The 04/06 cyborg VASA will work, as will about any cocker one (with modification). 06 cyborg frames work with modification. I also heard viking frames work without modification.

Solenoid is the same as the 04/05 freestyles (and possibly later).

Eliapb is doing milling and making eye covers, DC is selling most of the needed parts and doing an LPR, coolhand is working on a frame.

edit- oh wow, the three posts above me came while I was writing this all up.
 

·
Administrator
Joined
·
23,645 Posts
wait a tick, I own that frame. Greg makes them on occasion for bushmasters and they're $125 a pop. I love them to death, most comfortable frame I've evre used.

Insterestingly enough, this is starting to looks more and more what us bushmaster fanatic s are all about. the ultimate poppit valve marker. Maybe I'll jsut stick with my bushy and call it even:)

I also hear greg is working on a marker right now, Whiel everyoen is curious about what it's going to be, he's not released very much about it.
 

·
I was saving that bacon
Joined
·
7,177 Posts
Discussion Starter #10 (Edited)
It was the gun they were making with PE that is now the Ego if I am remembering correctly(My memory is shady on that era).


Don't think that is entirely correct. From what I have read, most people thought that because somebody put an e-blade frame on one of them. So they just put two and two together. However, that may be wrong.




But yea, the milling elia is going to do is awesome.





Also, DC will have a pre-order list up by the end of the week for the LPR's.
 

·
I was saving that bacon
Joined
·
7,177 Posts
Discussion Starter #11
Double post...


The LPR's are up for preorder on DC. They expect them to be shipped out in may. They are $92.



I now have the body, frame, lpr, and ASA taken care of.
 

·
Hebrews 13:8
Joined
·
42 Posts
Double post...
The LPR's are up for preorder on DC. They expect them to be shipped out in may. They are $92.
I now have the body, frame, lpr, and ASA taken care of.
Thats interesting. DC is also selling the M bodies for the same price as Ryan is.
I wouldnt be surprised to see DC sell a few of these as complete markers in the future.
If I had the money I'd get one.
I prefer an AKA electronic marker over any other electro made.
AGD for mechs, AKA for electro's .


thumup:
 

·
Its never lupus
Joined
·
9,169 Posts
Double post...


The LPR's are up for preorder on DC. They expect them to be shipped out in may. They are $92.



I now have the body, frame, lpr, and ASA taken care of.
Kinda hefty for an LPR. I wonder how much it would be to have an adapter milled (I have two aka LPRs, one for a freestyle and and one for a bushy).

What frame are you using?
 

·
Registered
Joined
·
11,482 Posts
If you slightly modify a cyborg LPR that will work.

I've been following the evil m thread very closely. I might purchase a body and keep this as a project for over a period of a few years (don't have the money to shell out all at once).
I've been thinking of doing the same thing.
 

·
I was saving that bacon
Joined
·
7,177 Posts
Discussion Starter #16
They suggest the Cyborg LPR right now, it has the least amount of modification to it. However, I would rather pay extra and get one from DC. These should be pretty good. Plus, where its a limited run, its more expensive.


I will be using the T2/G2 frame from bluefork. Only problem with them, is I believe they are hard to find. Not as hard as a 06 cyborg frame though lol. So if anybody sees one of them for sale, I will love you forever(plus send $5 paypal :p )

I will have pics and more updates in a couple of days. Right now I have everything planned out, just ordering slowly due to the LPR's not coming in for a while.
 

·
Its never lupus
Joined
·
9,169 Posts
They suggest the Cyborg LPR right now, it has the least amount of modification to it. However, I would rather pay extra and get one from DC. These should be pretty good. Plus, where its a limited run, its more expensive.


I will be using the T2/G2 frame from bluefork. Only problem with them, is I believe they are hard to find. Not as hard as a 06 cyborg frame though lol. So if anybody sees one of them for sale, I will love you forever(plus send $5 paypal :p )

I will have pics and more updates in a couple of days. Right now I have everything planned out, just ordering slowly due to the LPR's not coming in for a while.
Pretty sure macdev usa has them in stock.

Also eddahenry on pbn is selling 07 frames for 40 dollars. He used to be selling x fighter bodies, frames, and VASAs for ~110 (total)
Here's a link to the 07 Macdev 07 Cyborg raw frames and bodies - PbNation

I don't think the 07 frames will fit as well as the 06.
 

·
I was saving that bacon
Joined
·
7,177 Posts
Discussion Starter #18
My milling will be finished today!!!! Pics will be posted when I get them.
 

·
Its never lupus
Joined
·
9,169 Posts
Still looking for an 06 borg frame?

Look for mo's paintball on ebay
 

·
I was saving that bacon
Joined
·
7,177 Posts
Discussion Starter #20
I actually got a T2/G2 frame right after posting this. I have had my eyes on one of those frames for a few days.

Do you know if a yakuza droid board will fit in the 06 frames? If it would just drop in it I would buy it right now.
 
1 - 20 of 34 Posts
Top