Paintball Guns and Gear forums banner

1 - 10 of 10 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1
ok so i have the choice between a new evolution 3 $60 or a used halo B $65 but i dont know which one to get because ive heard that the halo B crams balls down your feedneck and you have to by new bolts. i have a VS2 and i would appreciate any help. thank you
 

·
Registered
Joined
·
22 Posts
Discussion Starter #5
yeah but i herd the halo B can mess up your gun cause it shoves them down the neck """It feeds balls into the gun with so much force that your going to have to start replacing components to deal with this (or just chop balls) I had to replace my detents and bolt (on my timmy) to accommodate my hopper. My angel was totally overwhelmed (only 1 detent) When I investigated I found the forums filled with LOTS of people having problems with the halo shoving balls down so hard it causes problems. So big is the problem that Halo is on the 3rd mod to the halo to try and control the ball feed torque. The best adjustment you are left with is to grease the belt to reduce the torque the motor is transmitting and thus how hard the hopper is jamming balls down into the gun. Think about it, what a rotten solution this is!""
 

·
Registered
Joined
·
22 Posts
Discussion Starter #6
also is this true " The neck is so fat your not going to be able to find a feedneck that fits it."?
 

·
Administrator
Joined
·
23,657 Posts
only if you have very weak detents; this may have been a problem years ago when it was released adn detents were not built for such pressure, but that is no longer the case. In fact, I've never heard of that problem. thousands of people use the halo, I don't see any reason against using it.

they do make thte feedneck fat, but they're made that way on purpose so that they're a nice tight fit. If it it too fat, youc an either buy a clamping feedneck, or sand the feedneck down slightly so that it does fit.
 

·
Registered
Joined
·
22 Posts
Discussion Starter #8
but what about the hopper not being able to see black paint, also im thinking about getting the empire reloader b now
 
1 - 10 of 10 Posts
Top