Paintball Guns and Gear forums banner

1 - 11 of 11 Posts

·
Registered
Joined
·
783 Posts
Discussion Starter #1
i opened up my gun and the little spring on the feed neck flew out, i put it back in but now my feed neck wont hinge down, the metal button is stuck.
 

·
Registered
Joined
·
783 Posts
Discussion Starter #7
clicked your name, then clicked 'Send Privet message to Mortisdeum' in the drop down menu
 

·
Registered
Joined
·
65 Posts
if you lost it call tippman or email them they might send you one
 

·
Registered
Joined
·
33 Posts
Uhmm... I'm not sure if people have suggested this yet (I haven't read the replies).

But the reason is likely one of the following:

1.) You tightened the screw at the front sight of the gun too tight.

OR

2.) You just placed the spring back in. You have to bend the spring so it fits snugly into place, but be careful when you're screwing your gun back together that it doesn't fly out again (same with the spring below the bolt).
 

·
Registered
Joined
·
65 Posts
yea losen the scerw and make shere the spring is all the way in its little slot
 
1 - 11 of 11 Posts
Top