Paintball Guns and Gear forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Yes I am to this so here it goes.
I just bought a used Halo b Hopper (as part of an entire package) and it didn't work with new batteries and cleaning the eyes, so I opened it up to check wires and voltages. The wires appear to be fine and the voltage from the battery pack to the motor is fine. So I unplugged the eyes from the board then power it on and the hopper will turn on, but of course the LED will flash red/green thinking it is jammed since there are no sensing eyes connected. I plug the eyes back in and nothing functions. If I power it on the LED flashes green for a sec then nothing. Anyone ever experience this? I am trying to track down a eye sensing harness locally but the shops I got in touch with, let’s just say to many PB's to the head.... I am hoping for any real advice before I order it online, and am wrong. The only other thing I can think of is the circuit board which I don’t really feel like buying.
Thanks for humoring the new guy!
 
1 - 2 of 2 Posts
Top