Paintball Guns and Gear forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
68 Posts
Discussion Starter #1
So im headed to the PB store tomorrow. Here is what I plan to come home with...

Regulator
HPA tank
14 inch barrel
Responce trigger

So before I leave here are my 2 questions..What size HPA tank should I get
What di I need to make the R/t setup a "super R/t setup"
I hear that the super R/t will do 18-20 BPS.
 

·
3D Airsmith
Joined
·
1,689 Posts
you can get 18 off a stock RT

The best tank would be a 68 cubic inch tank rated for 4500 PSI and you not need to fill it as often threw out the day

The Super RT is when you take the RT piston from a Lowpressure kit and use it on a standard set up (Hig Pressure).

I would not recomend doing the Super RT as the parts you are using were not ment for the higher pressure.

Also if your getting a Reg You WILL need an adapter to install it. For that don\t get the Ben Tippmann one becease it is 3 parts and has 2 places that will leak and give you nothing but trouble. The only reason mine does not leak is I used a liberal amount of Teflon Tape to get a good seal.
 

·
Screaming Koala
Joined
·
4,685 Posts
Since its just been covered pretty good, I'll just add.

Since there isn't a hopper on that list, I have to say you'll want an electric hopper, the faster it can load the better.
 
1 - 5 of 5 Posts
Top