Paintball Guns and Gear forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I have had my mini for about 1 month now and have no issues. Straight out of the box with stock settings, I was able to play in tournament games with no issues. Getting use to the 200 maximum PSI settings while making velocity adjustments took a little time but I got the hang of it. Has any noticed that when shooting the first ball on the chrono, it shoots high but every ball after that is fine?
Also, I would like to get some suggestions on upgrades.
Currently I am using a 14 inch one piece proto barrel, Halo V35 hopper, and 48/3000 pure energy compressed air.
I would like to possibly upgrade the trigger and get a new barrel.
Any suggestions would be appreciated.
 

·
Paintball?
Joined
·
7,646 Posts
1. If your first shot is hot, you could be getting regulator creep
Try putting a few drops of oil down your ASA

2. I'd get a 4500psi tank first

3. New trigger should only be for feel

4. New barrel should only be for blatantly obvious accuracy issues
 
1 - 2 of 2 Posts
Top