Paintball Guns and Gear forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
6,346 Posts
Just take this to be the time ot set your dwell. Drop it down to zero then bump it up until you are getting full cycles, then jump it up another 2-3 for safety. Read your manual too btw.
 

·
Registered
Joined
·
7 Posts
I would just put the Recharge rate all of the way to the bottom, this way you are taking full advantage of your circuit board. The dwell I would leave at about 15 ms (48 blinks). Unless you have a 360 QEV leave ur dwell here. If you do have a 360 QEV put ur dwell at either 12 or 13 (36 or 40 blinks).

I hope this helps
 
1 - 5 of 5 Posts
Top