Paintball Guns and Gear forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
58 Posts
Discussion Starter #1
Little issue Ive been having, but can't pinpoint it to a certain point
Every once in awhile when I look in the barrel, I see there is paint chips in the barrel meaning the ball chopped, however the paint isn't in the cyclone hopper or near the ball detent, so this means it broke during the trip in the barrel
Reasons I think this is happening
1. There is a very thin but still there layer of oil in the barrel, however i don't have a squeegee to clean it
2. My velocity is high I think but I don't know how to get it reasonable with a chronograph.

Gun is a Tippmann 98 Custom Pro
-Cyclone
-Expansion Chamber
-E-Trigger
-ETC
 

·
Registered
Joined
·
58 Posts
Discussion Starter #3
Thanks for the response
however, I don't have the manual since I bought it off someone else
I guess Ill check for it on the internet
And i know how to change the velocity, i just don't know how to get it fairly right...
 

·
Registered User
Joined
·
815 Posts
Thanks for the response
however, I don't have the manual since I bought it off someone else
I guess Ill check for it on the internet
And i know how to change the velocity, i just don't know how to get it fairly right...
Are you eyeballing it or are you using a chrono for the velocity?
 

·
Registered
Joined
·
58 Posts
Discussion Starter #7
True, however it can't be reason number 3.. because the paint is actually smaller than the barrel o_O
 
1 - 8 of 8 Posts
Top