Paintball Guns and Gear forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
641 Posts
Discussion Starter #1
I recently replaced my Z-egg with an empire reloader b and I just came back from testing it out...flawless. I don't have vision or anything so I'm used to a chop or two but I strapped that sucker on and loaded a 140 pod into it and let er rip. not one chop.

here's my settings: I used 6 AAs and I think setting one...can anyone tell me how to change its settings? I read the manual but it kind of confuses me on how to change the settings.

advice/comments from RB owners appreciated

thumup:
 

·
Registered
Joined
·
4,886 Posts
To change the settings:
Turn the the hopper on, one it turns on, hold the button down until the light turns red. Let go of the button, then press it 1,2, or 3 times depending on what setting you want it on. It will then flash 1,2, or 3 times to tell you what setting it is on, and it is set.
 

·
Just Chillin'
Joined
·
5,062 Posts
Right after you turn it on, hold it down for a second or two when the green light comes on, it will stay lit for a second or two so you don't have much time. When you do that, you are basically in the menu, and you can pick the speed setting. And yes, the manual was confusing to me too, but I figured it out.
 
1 - 4 of 4 Posts
Top