Paintball Guns and Gear forums banner

1 - 13 of 13 Posts

·
Registered
Joined
·
54 Posts
Discussion Starter #1
ok i just got a 2k3 gen-e lcd matrix with a pbc lpr, bob long torpeto reg, gun 20 chip, strange bolt kit, cp rail, some 2 peice kapp barrel, and some clamping feedneck. but i dont know any thing about it, i dont know how to adjust the trigger, set up forward and back pulses, on even change the battery, i was also wondering if its worth dropping a hundred and somthing for a new board and eyes, or is it posible to put eyes on the board i already have?
 

·
Registered
Joined
·
54 Posts
Discussion Starter #8
BkoMasta808 said:
To get the backplate off, unscrew the breech knob.
i cant get off the breech nob, which way does it unscrew, i really dont wanna break something.

thanks for the owners group website

i also just noticed there is white liquid in the place were the volumizer goes on the right and in the little hole above the lpr, is this bad?
 

·
Registered
Joined
·
148 Posts
Its probably just screwed on really tight. Just turn it counter clockwise real hard and it should come off. If not, use a mini strap wrench.
 

·
Registered
Joined
·
337 Posts
kool man welcome to the trix family and yes get some eyes on there i love my gun!!! eyes are expensive but worth it IMO..
 
1 - 13 of 13 Posts
Top