Paintball Guns and Gear forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
923 Posts
Discussion Starter #1
Anyone know some sweet settings for the M7 Tadao board for the ego that is decent on air.

Ill post my settings after next weekend, they are stock right now but another guy on my team has the board and has "custom" settings that he says work great.

I'll also have a vid for the thread i started too ;)
 

·
redneck with a blowtorch!
Joined
·
2,345 Posts
you need to spend some time and simply tune the marker. for example higher LPR pressure and higher HPR pressure will allow for lower dwell and more effeciency. while the adverse will allow for 'smoother' operation. If your desire is to make the gun as effecient as possible, it should matter what board is in there, just tune it. keep reducing the dwell until you get shoot down or irractic FSP over the crono then raise it until that goes away. or try and correct by raising the HPR or LPR.
 

·
Registered
Joined
·
923 Posts
Discussion Starter #3
debounce - 10
loader delay - 1
dwell - 7 - 9
anti mech bounce - 2
abs dwell - 3
eye mode - 2
bolt delay - 10
cpf - 2

thats what i found to work decent on the board, i will have a video up later tonight of my gun ripping..

dirty
 
1 - 3 of 3 Posts
Top