Paintball Guns and Gear forums banner

1 - 2 of 2 Posts

·
Screaming Koala
Joined
·
4,685 Posts
What about it?

Take the hopper and elbow off. Wash them if they have paint on them. Same for the barrel.

Strip the bolt and hammer out. Clean the bolt. Wipe the old oil off of everything. Apply new oil to the O-rings. Swab the body out. Put it back together. Everything in that gun is corrosion resistant, so you can use water if it is really gooped with paint, except the electronics in the grip.
 
1 - 2 of 2 Posts
Top