Paintball Guns and Gear forums banner

Markers, Masks, Hoppers, Clothes/Pads, Barrels all must go!

5453 Views 25 Replies 8 Participants Last post by  TheAznInvazn
5
Howdy, Friends!

So I'm getting out of the sport, and have lots of things that need to go. All prices are OBO and include PayPal fees and shipping unless otherwise noted. Insured shipping is not included, but can be included if you wish to pay for it.

Markers


Dangerous Power Fusion F8
- $220 OBO

A video showing it working from a while back can be found here.

Current specs:
Dangerous Power Fusion F8
Modded Violent Bolt (bolt now flows with the body shape and Cure3 Ramp)
Lurker Eigenram
Lurker Golden Poppet
7th Element Board
Lightened Ram and Poppet Springs
Magnetic Trigger Mod
Modded RAPS ASA (High flow now, no more restrictive airways!)
Modded Valve to High Flow
Lightened Detent Springs
Stock Clamping Feedneck with Feedneck Shim Mod
Stock Bushing Trigger
Fusion F7 LPR

Note: Stock grips are getting old and sticky, new grips are probably a good idea. This was my pride and joy, and she shoots like an absolute dream. Some tweaking may be required since she's been sitting for a long time, but she can hang with the best of them.

Mech Psychoballistics Autococker
- $150

Additional pictures can be found here.

Current specs:
Psycho Ballistics MiniCocker
Shocktech Slider Frame
Shochtech Bomb 3-Way
Omega Roller Trigger and Sear
Palmers Stab
Palmers Rock LPR
STO Ram
Clamping Feedneck
Dye Stickies
SLIKIII Evo Bolt

Note: Timing might not be as good as it could be, I never got it to the point I wanted it. Cocker timing experience would be a good thing if you're considering purchasing this. Otherwise, and awesome build.

SmartParts EOS
- $120

Current Specs:
Bob Long PillowBolt w/ Ion Spring Bolt Mod
CP Clamping feedneck
Freak Jr. Barrel w/ .693 Insert
360 QEV
CP ASA
Red CP Sling Trigger
Warrior Ion Body
7th Element Board

Note: Will come with extra Ion Body that covers the eyes. Slight modification required for the body to fit. I will do the modification for an additional $20. Barrel scratched by the threads.

Spyder VS2.5
- $100

More photos can be found here.

Current specs:
Spyder VS3 Body
Spyder VS2 Trigger Frame
Spyder Color Kit
Clamping Feedneck
CP Reg Adaptor
On/Off ASA
CP Sling Trigger
FREAK Barrel
Dye Hyper 2 Reg
Custom Dyed and Modded Stock Bolt (Red)
Custom Steel Ball Bearing Spring Loaded Detents
Tadao Board with Musashi 7 Chip

Note: This was a tinker project, so sometimes this acted up. After sitting so long, I'm sure it will need more tinkering. A perfect marker for those who like to mess with their stuff.

Odyssey RPM
- $100

Current specs:
Diablo Wrath Upgrade Bolt
CP Trigger
On/Off ASA
Clamping feedneck
WGP Bullet LPR
Diablo Wrath Virtue Board
Ball Bearing Detents
Evil Pi Reg

Note: Does not come with a barrel. FASOR style markers make great loaners and tinker projects!
See less See more
1 - 20 of 26 Posts
11
Hoppers

Gen 1 Smoke Pinokio
- $75

New Smoke Shells
Comes with smoke long nose, smoke short nose, and black short nose
Ghetto speed feed, no lid.

Invert Halo Too
- $45

Ghetto speed feed, otherwise bone stock, never used in game

Viewloader VLocity Jr.
- $55

No Lid
Dynasty Upgrades

Empire Reloader 2
- $10

Works, but shell it getting brittle

Proto Primo
- $10

Like new, used to test some markers, but never used in game.

HPA Tanks


DXS 48/4500
- $75



5 year hydro
Still in hydro
Mid pressure reg
Free tank cover and thread protector

Pure Energy 68/4500
- $75



5 year hydro
Still in hydro
High pressure reg
Free tank cover and thread protector
See less See more
Any idea how hat Primo hopper would fit on a CCM feedneck?
13
Barrels

SmartParts FREAK Inserts
- $90

Hard Case
7 Different Insert Sizes
Reball
.679
.682
.684
.687
.689
.691

Note: Barrel Backs not included.

J&J Ceramic Edge Elite Autococker Kit
- 100


Hard Zip Case
10", 12", and 14" tips
7 Backs
.676
.679
.682
.685
.688
.691
.693

HammerHead Dominator Spyder Threads
- $10


12" long
.690 Back

Masks


Vents Avatar
- $35

Comes with mask bag, forehead protector, and two clear lenses
Recently replaced head strap
Foam a little beatup, but in decent condition

V-Force Profilers
- $35

Foam beginning to crumble, replacement recommended.
Lens is older, replacement recommended.

Pod Packs


NXe Elevation 3+2+2
- $30


Overall excellent condition
elastic still stretchy

Clothing/Pads


JT Pants
- $35

Older pants, but in excellent condition
Size 32
Knee padding good
Hems good
No rips or tears

Dye Slider Shorts
- $30

Excellent condition, only worn a handful of times
Size Small

Eclipse Distortion Medium Size Knee Pads
- $30


Excellent condition, only worn a handful of times
See less See more
7
MISC

Palmers Quickswitch 3-Way Valve
- $35

Extremely Good Condition, no real damage noticeable on the body of the 3-way.

Tank Blower Adapter
- $10

Turns your tank into a compressed air blower!

Chronograph
- $25


Chrono your paintball, airsoft, and pellet guns!
Mini tripod included

Barrel Bags
- $5 or free with marker purchase while supplies last

2 Confederate Flag barrel bags
1 Digicam barrel bag

Pods
- $10 or $5 with any other purchase

6 Pods

Macro Line - $10

A whole lot of continuous length macro line, around 20 feet.
See less See more
Any idea how hat Primo hopper would fit on a CCM feedneck?
It fits the CP feedneck on my EOS very snugly when the feedneck is clamped as tight as it can go.
you forgot the size for your pants and shorts...

and you said firehead ^.^
Good calls, thanks!
got any regulators or ASAs around?

I will be taking that primo more than likely, been looking for one for my pump
got any regulators or ASAs around?

I will be taking that primo more than likely, been looking for one for my pump
Me too! Right now I'm using my spire, which is working out just fine I suppose. It's not very good for pump cred, though.
primos too big for pump cred. go to straight stick feed, tube feed, or 50 rd.
got any regulators or ASAs around?

I will be taking that primo more than likely, been looking for one for my pump
All my ASA's and regs are on guns, so if you'd like one, please purchase one of my awesome markers!

Let me know when you want to do the deal, I'm ready when you are :)

edit~

Totally lied, I found a reg. It's got a twisty bottom and I can't remember who makes it. I'll get pictures soon!

~edit 2

See less See more
If I didn't have so many regulators in my parts kit already, I'd be half tempted to buy that Psychobal just for the Stabilizer and the pretty pretty slide frame. That and just not honestly having any use for the marker other than the reg.
If I didn't have so many regulators in my parts kit already, I'd be half tempted to buy that Psychobal just for the Stabilizer and the pretty pretty slide frame. That and just not honestly having any use for the marker other than the reg.
Help a brotha out, you know you want it...
is that a cap on the reg and are there standard ADA threads under it? I can only use it if it is a standard ASA thread

martix gets the primo, I may be getting a free one
Yup, those threads are regular ASA! Do you want the 1/8 NPT adapter too? If you do, I can throw it in for you :)
adjustable? and how much you want for it?
Are the Vents still around? I am interested in them.
adjustable? and how much you want for it?
Did some research, It's a Hybrid Quest inline reg, and it's adjustable!
Maybe $30 shipped?

Are the Vents still around? I am interested in them.
Vents are available!
1 - 20 of 26 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top