Paintball Guns and Gear forums banner

1 - 20 of 21 Posts

·
Registered
Joined
·
100 Posts
Discussion Starter #1
hey i would like to know if this is a good gun pros and cons. R they complicated??? and r high matinence?? and what is a good price for one???
 

·
...
Joined
·
1,751 Posts
yes these are very nice guns if upgraded correctly.
Pros:
Fast
low/no kick
instant on(most boards)
quiet
very efficient(with correct ups)
very low pressure(with correct ups)
Cons:
heavy
inefficient stock
complicated if you dont read up on it

For complication, as long as u read up a lil bit and learn the basics of the gun...its extremely simple with almost no moving parts.

Mantinence is also the same, once u get it set up correctly, all you really have to do is lube your bolt and replace batteries, except for the occasional cleaning/lubing of regs.

prices for these go from 350-about 800 for a fully upgraded led
 

·
not really named bob...
Joined
·
2,368 Posts
it matters on your settings and how fast your fingers are. I can outshoot my egg. Some boards are capped low enough for chopping not to be a problem. Id try it out and see if you chop. If you do the matrix center will sell and install through beam eyes for you or you could buy a halo b/reloader b/z-board.
 

·
Jewstin
Joined
·
4,341 Posts
Yeah i loved my LED. When i first bought it, it didn't have any ball detents so i was angry. Although i went up to Atomix and bought some. As long as you have your LPR setup correctly and such you shouldn't chop.

Very nice i love Matrices.
 

·
...
Joined
·
1,751 Posts
rivit said:
are they heavier than 03`s whats diff between 02 and 03
the year means almost nothing for older trixes...its either gonna be a slideswitch(older) or a push button(newer) they are they same weight as far as i know
 

·
...
Joined
·
1,751 Posts
check the stickies im pretty sure its in there...if not then what you do is first screw your lpr all the way in and turn your inline all the way down. Now turn up your inline reg until your shooting your desired fps(300). Once you get here you slowly start unscrewing the lpr while shooting a few after every turn...once you see a drop in fps you screw it in about 1/4 to 1/2 a turn and shoot a few burst to check for dropoff...if its still 300 without dropoff...your gun is set
 
1 - 20 of 21 Posts
Top