Paintball Guns and Gear forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
when i shoot i think my trigger frame becomes loose. also another thing one time i was playing in my friends yard and i shot my gun shot and i tried again but then found out the bolt had recocked but about an eigth of an inch short of where it should have cocked. Are these things i can fix and if they are a problem would it be covered by the waranty?

thanks for your help
 

·
Registered
Joined
·
11,482 Posts
locktite on the screws. U want to use the blue stuff, can be found at local hardware stores, also known as threadlocker.

Polish the bolt and hammer (www.ottersccustoms.com) he has all types of common mods. Or oil the o-rings.
 

·
Registered
Joined
·
11,482 Posts
this is blue locktite, it's the weaker stuff and should only need a little extra force to get it off. U will need to reapply though. Just drip it on the threads and ur done. It works good, i used it for my feedneck which wobbled b/c of the heavy halo B on top, solved that.
 
1 - 5 of 5 Posts
Top