Paintball Guns and Gear forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1
got a big problem, im getting some new parts for my 98 and my bolt/screws or what its called is old so my alen wrench dosent get any grip.
what do i do?? :?
 

·
Registered
Joined
·
599 Posts
It sounds like you have stripped the grips at the top of the screws. If another size doesn't work then you may have to take it to a shop and have them remove the scews, or you can try another method of removing them. Either way, you will probably have to buy another set of Allen Cap Screws for your marker.
 

·
shine on.
Joined
·
10,745 Posts
You either

a) Stripped the screw

b) Have the wrong size wrench.

If you stripped the screw then you can drop so loctite in there with your wrench but you'd be out an allen wrench and screw.

If you have the wrong size, get a different wrench.

Or you could just take it to the local shop like someobdy said already.
 

·
Registered
Joined
·
22 Posts
Discussion Starter #6
hmm, ill wait til i get that rust free thingy and just glue an alenwrench then take it away
got some crapy alen sets and some i got 3-4 of
 

·
Registered
Joined
·
559 Posts
drop some wood glue in it and hold your allen wrench in it then when it dries screw it out then just break off the glue.
 

·
Registered
Joined
·
22 Posts
Discussion Starter #8
k, the screw is fixed, im puting a remote on my gun and a stock so it`ll be easier playing, thanx for the tips all!
 
1 - 8 of 8 Posts
Top