Paintball Guns and Gear forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
128 Posts
Discussion Starter #1
Last weekend we had a blow out and I found that two of the orings in the vertical reg had gave out. I'm wondering since when hooking up air to it it leaks from the trigger if this is the cause. I know i need new orings for the reg but want to be sure I dont need something else to fix it so I can have it fixed in one order and by the weekend. I'm not seeing any other ring that is out in the gun after ripping it apart but may have missed something..
Is it just those to orings in the vertical reg?
 

·
Registered
Joined
·
128 Posts
Discussion Starter #2
I just seems weird that the reg rings will make the air leak threw the trigger but I'm still figuring these things out..lol I did check the hammer and all others as I cleaned it. will pull it back apart and make sure before i place the order. Thanks for your help..
 

·
Registered
Joined
·
128 Posts
Discussion Starter #3
i'm not nearly knowledgeable enough to say whether or not to check your valve, but i'm assuming you've never touched that, and therefore it should be fine. Azn/Trbo?
Well what I've found is that if it leaks from the trigger it's the valve body oring (ORG002) but I can't seem to get the Valve body out of the gun..:confused: Will have to give it another go after work and see if I can figure something out.
 

·
Registered
Joined
·
128 Posts
Discussion Starter #4
EDIT!!!
I figured out how to get the valve body out but found the orings to be fine. Went ahead and replaced them, greased and reinstalled. All thats left is to get the Vertical orings (ORG024) and hope thats the cause of all this leaking. If not I'm stumped.
 

·
Registered
Joined
·
128 Posts
Discussion Starter #5
Now I had time to put back together with the new orings in the valve body and no leaks.. The funny thing is I still need the orings for the vertical reg???..lol Makes me think that those are pointless but not sure how long they will last without them.
 
1 - 5 of 5 Posts
Top