Paintball Guns and Gear forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1 (Edited)
Just getting into paintball - took my Brass Eagle Striker apart to check O-rings which I had never done before, but it looked easy on the diagram. Put everything back together and when I try to cock the gun, the bolt assembly is just really loose and doesn't cock. Can somebody tell me what I've done wrong? Can someone explain in great detail how to reassemble this gun?

Thanks a million!

P.S. - This is the red and black plastic type striker, not the gray one - not sure why they are both named striker but are two different guns (told you I was new to paintball - lol)
 

·
Paintball?
Joined
·
7,646 Posts
Look at the manual, if there's an exploded diagram, put everything back EXACTALLY like it shows

Sometimes all you need to do is take it apart and out it back together again for it to work
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
There is an exploded diagram and I put everything back the same way I found it but it still won't cock - the bolt assembly is just real loose.
 
1 - 3 of 3 Posts
Top