Paintball Guns and Gear forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
117 Posts
Discussion Starter #1
When I finish cleaning our tippys, I place a few drops of oil in the ASA and dry fire a few times.

I am thinking of adding a gauge, but I think they all say NO OIL...

Are there any gauges that are not affected by a little oil?
 

·
Registered
Joined
·
117 Posts
Discussion Starter #2
The reason why I am looking to add a gauge to my marker (the ASA simply provides a convenient mounting location) is for the following problem:

I ran a 32degree remote last w/e, and for some reason I was getting very low pressure which I verified with a chrono.
I kept messing w/the remote valve on my back (and may have messed w/the ASA) before I was able to get consistent pressure and an acceptable chrono.

Both the empire ASA and 32degree remote have a similar desgin, a post that moves down as you turn the valve.

Having a gauge on the ASA would allow me to verify pressure anytime, by simply lookin at the gauge on my marker.

Maybe I should have posted a question if there was a trick to these fancy valves?

Has anyone ever experienced this problem?
 
1 - 2 of 2 Posts
Top