Paintball Guns and Gear forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
77 Posts
Discussion Starter #1
hi i was playing for the first time and my gun stopped firing. i thought it was because i am out of air but taking the hopper off i noticed that a paint ball got stuck between the wall of the vertical feed and the hammer but didn't break. my question is should i try to take it out with tweezers or something or try taking that part of the gun apart to take it out. what would you do in this situation? thanks for any replies in advance.
 

·
Registered
Joined
·
328 Posts
if its like in a position that would chop, just use a squeegee and shove it down then shoot it out.
 

·
Registered
Joined
·
233 Posts
burst it and clean it out like redneck said
 

·
Registered
Joined
·
2,227 Posts
pull the bolt back. if that doesnt work, pull the bolt out. or if your gun isnt quick strip and you cant pull the bolt out, then take it apart. no point in wasting time cleaning it when you can just pull the ball out...
 
1 - 6 of 6 Posts
Top