Paintball Guns and Gear forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I have an old 1995 i believe Cocker that i never use any more. I'd like to convert it in to a pump.
basic question: Is it worth the hassle?
1.The gun shoots okay but is pretty much stock other then the barrel and some sort of an expansion chamber.
2.if you know pre 99 cockers.. they are heavy. Would it make sense just finding a newer sniper?
3.I am thinking i'll get the basic CCM pump kit.
4.Will i have any problems running compressed air with a basic expansion chamber?

anything else i would need to do to a pre 99 cocker to make it work well as a pump?
 

·
Registered
Joined
·
6 Posts
Discussion Starter #2
or would i be better off going with something like this:
http://cgi.ebay.com/Autococker-pump-War-Machine-Relic-paintball-gun_W0QQitemZ280306775789QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item280306775789&_trksid=p3286.c0.m14&_trkparms=72%3A1205|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50
 

·
Registered
Joined
·
4,186 Posts
Weight doesnt really matter, pre99's make sweet snipers.
Odds are depending on what airsource you when it was semi, youll need a reg. If you ran co2, just do that as well.
CCM kits are the best you can get, I have the deluxe on my sniper(02 model) and its butter smooth.

The link you post is a Physco Ballistics Superbolt. Decent cockers, make excellent snipers because of how cheap they are. For 71 bucks that is a steal, especially since it comes with a kit. If you have 71 bucks snag that ebay one, thats a steal.

And ignore the custom ****. The only thing custom on that marker are the grips and pump handle. 100 were not made. Superbolts were mass produced, still a steal though.
 
1 - 3 of 3 Posts
Top