Paintball Guns and Gear forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
591 Posts
Discussion Starter #1
What exactly should I do to take care of my gun I have a Spyder Victor II? I clean my barrel everytime after I am done playing and like every other time I play I take it apart and clean the other parts. what else can I do?
 

·
Wheeeeee!
Joined
·
1,366 Posts
Mostly, make sure you're lubing up the insides. That is, pour a little gun oil into the ASA (where the tank screws in), then screw the tank in (make sure not to spill the oil!) and fire 3-5 shots. Other than that, it sounds like you're doing what you need to do: taking it appart and making sure there's no debris around the bolt. Maybe a moist wash-cloth over the outer surface every now and then, and you should be all set.
 

·
Registered
Joined
·
591 Posts
Discussion Starter #3
Shytkicker said:
Mostly, make sure you're lubing up the insides. That is, pour a little gun oil into the ASA (where the tank screws in), then screw the tank in (make sure not to spill the oil!) and fire 3-5 shots. Other than that, it sounds like you're doing what you need to do: taking it appart and making sure there's no debris around the bolt. Maybe a moist wash-cloth over the outer surface every now and then, and you should be all set.

ok I have the Lubing oil stuff but could you try to explain what I use it for better I didn't completley understand.
 

·
Wheeeeee!
Joined
·
1,366 Posts
The ASA, that's the part where your tank screws in. Hold your gun so that the screw-in part is facing up. Pour a little oil in there, and screw the tank into it (with the oil inside). Make sure the ASA is still facing up while you screw it in. Then just fire a few shots. This dispurses the oil through all the innards of your marker.
 

·
Registered
Joined
·
3,206 Posts
when puting oil in the asa and shooting, TAKE YOUR BARREL OFF!!! IF the oil disperses throughv the barrel, it will mess up the bore size
 
1 - 7 of 7 Posts
Top