Paintball Guns and Gear forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
157 Posts
Discussion Starter #1
I am going to do this but it says to use 300 grit sand paper and 600 grit.. my local stores finest grain was 220... Is grain and grit the same thing because mine is 220 grain not grit.. The maine question is can I use 220 or is that to rough
 

·
Taking Back Control
Joined
·
2,191 Posts
um.....id say if you have to use it, use it but be careful. dont take off too much, just enough to smooth it out...do you have steel wool? you can use that too....

if you can wait until you can get 300 or finer, id do it.
 

·
Registered
Joined
·
157 Posts
Discussion Starter #3
I have to take it apart to clean it anyways. I'll just do some touch up with what I got.
 

·
Registered
Joined
·
102 Posts
Yeah thats a pretty big difference for sand paper grit. where did you get the info for polishing internals?
 
1 - 7 of 7 Posts
Top