Paintball Guns and Gear forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter #1
I was haveing trouble with the e-grip when installing the JCS double trigger.The solenoid seemed to be sticking.I tried to change the battery and to loosen the grip.I even scaned the forums and the only thing I could come up with and would seem to be the main problem was that the push rod would be mushroomed, but that did not seem right because the rod looked just fine. As luck would have it my friend lost the sear spring so we had to replace it with one that was heavier. magicaly the solenoid started to work right.If you are have this problem, try to put a heaveir sping in the sear and see if it help you too. we played a full day of paintball with no problems so this seems to be a good alturnative to shipping the grip to tippman. Good luck and I hope this helps you too. VLLAD
 
1 - 1 of 1 Posts
Top